Leading 10 usual forklift crashes ， forklift procedure need to take notice of these issues ！.
Leading 10 usual forklift crashes ， forklift procedure need to take notice of these issues ！.
Blog Article
Don't undervalue the forklift at the workplace. If the procedure is not good, there will be major mishaps in minutes, and there are numerous accidents including forklifts.
Case 1: The forklift freight blocked the chauffeur's view, and the individual in front could not be discovered, leading to a moving crash.
Instance 2: In order to preserve the balance of the forklift when raising heavy items, the employees used their body weight as the counterweight, which almost caused casualties.
Case 3: The size of the forklift freight surpasses the permitted width of the route and holds on the roadside shelf, which practically triggers an accident.
Case 4: Forklift is speeding up and surrender during a turn.
Case 5: The forklift driver did not see the pedestrian, and the pedestrian did not see the forklift.
Situation 6: The forklift lifts the personnel unlawfully, the forklift motorist does not wear the seat belt, the forklift lifter drops and the chauffeur is crushed when the forklift surrender.
Situation 7: The forklift driver did not put on a safety belt and fell from the lorry when it surrendered and was crushed.
Forklift procedure should pay attention to these issues ：.
Beginning.
1. Prior to starting, observe the environments, and after verifying that there are no obstacles that prevent the security of driving, beep the horn first and then begin.
2. For vehicles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) gauge have to be secure before beginning.
3. When the forklift starts with a tons, the driver must first verify that the load is steady and dependable.
4. The beginning should be slow-moving and steady.
Driving.
1. When driving, the elevation in between the bottom end of the fork and the ground ought to be maintained 300mm-400mm, and the mast must be slanted backward. .
2. Do not raise the fork too high when driving. When going into and leaving the work site or while driving, beware that there will certainly be no obstacles in the sky. When the load is traveling, the fork has to not be elevated too expensive, which will certainly affect the stability of the forklift. .
3. After dumping, the fork should be reduced to the typical driving placement before driving. .
4. When turning, if there are pedestrians or automobiles close by, the driving signal needs to be issued first. High-speed sharp turns are banned. High-speed doglegs will certainly trigger the lorry to shed side stability and tip over. .
5. When the forklift is downhill, it is strictly prohibited to shut off the fire and slide, and it is restricted to brake suddenly while driving with loads unless there are special scenarios.
6. When the forklift is running, it has to comply with the traffic rules in the factory and must keep a certain safety distance from the car in front. .
7. When the forklift is running, the tons should be in the lowest position that does not hinder the driving, and the gantry ought to be correctly tilted back. The tons will not be increased other than when stacking or filling. .
8. The height of the tons should not obstruct the chauffeur's view. In unique circumstances, when the item affects the forward vision, drive at a low speed when turning around.
9. It is prohibited to turn on the ramp, nor to drive across the ramp. .
10. The secure driving rate of the forklift in the manufacturing facility location is 5 km/h, and it needs to drive securely at a reduced rate when getting in the manufacturing workshop location. .
11. When the forklift is lifted, raised or driven, it is prohibited for personnel to stand on the fork to hold items and play a balancing role. .
12. If issues are discovered, they will certainly be repaired and reported in a timely manner, and they will certainly never operate with diseases or conceal them.
packing and dumping.
1. When fork-loading products, the range between the two forks need to be adjusted as required to make the load of the two forks balanced and not manipulated, and one side of the item should protest the shelf. .
2. It is restricted to collaborate with a solitary fork or utilize a fork top or draw. In special conditions, security warning signs should be set up to advise surrounding pedestrians. .
3. In the process of packing and dumping products, the forklift needs to be stopped with the brake. .
4. The speed of the lorry need to be slow and steady. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled objects and injure individuals. .
5. When utilizing a fork to fork the goods, the fork should be as deep as possible under the load, and it ought to be kept in mind that the fork pointer should not touch other goods or things. The lots ought to be maintained with minimal back tilt of the gantry so that the load does not move in reverse. The pole can be tilted forward a little when the load is lowered to allow for easy positioning of the load and removal of the forks. .
6. It is prohibited to fork products at high speed and collide with difficult things with the fork head. .
7. When the forklift is working, it is forbidden for people to loaf the fork, so regarding prevent the collapse of the goods and harm individuals. .
8. Straining is forbidden, and it is forbidden to utilize forks to lift workers to participate in high-altitude procedures to stay clear of high-altitude falling accidents. .
9. It is not permitted to use the brake inertia to slide, put, round or roll things. .
10. It is not permitted to use forks to select, transform pallet dump.
Leaving .
1. It is forbidden to leave the forklift when the items on the fork are in Electric Forklift Truck for Warehouse the air. Before leaving the forklift, you should dump the goods or reduced the fork framework.
2. Pull the parking brake deal with to dead or dispirit the hand brake switch.
3. The engine is switched off and the power is removed. (Except for special conditions, such as the chauffeur does not leave the lorry's line of vision and does not surpass 1 min).
4. Eliminate the trick. .
Forklift Operation Precautions.
1. Prior to and after the forklift operation, the appearance should be checked, and gas, lubricating oil and cooling water need to be included.
2. Inspect the safety efficiency of starting, running and braking.
3. Inspect whether the lights Stand-on Electric Pallet Stacker and horn signals are complete and effective.
4. During the operation of the forklift, check whether the pressure and temperature level are typical.
5. After the forklift is running, the external leak ought to also be examined and the seals must be replaced in time.
Forklift Safety Operation Specifications.
1. You have to examine before leaving the cars and truck;.
2. When you run into somebody before you throughout driving, you should send a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not exceed 5 km/h;.
4. When driving, the nadir of the freight ought to be 0.3 m ~ 0.4 m in the air;.
5. The turning need to not be as well sharp to prevent the propensity of " complimentary switching";.
6. Adding and down the incline needs to be slow-moving and uniform, and no switching on the slope is enabled.
7. Do not drive across the slope. When the gradient is more than 10%, the lorry should be driven backwards when declining;.
8. When the forklift employees bring the goods and progress, if they come across big or hefty items and go to the driver's view, they should take the turning around workout
.
The "Eight Prohibitions" ought to be followed in the operation.
1. Solitary fork operation is not allowed.
2. It is not enabled to lift the goods for cross country driving.
3. It is not allowed to grab the goods by passing on the pallet with the fork.
4. It is not permitted to straight shovel chemicals, flammables and other unsafe chemicals with forks.
5. It is not permitted to use inertia force to grab the goods.
6. It is not enabled to utilize braking pressure to exile round or easy-to-roll objects.
7. It is not permitted to bring people to service the pallet or fork, and it is strictly restricted to stand under the fork after the fork is elevated.
8. Do not drive laterally on slopes
.
Auto parking is not permitted under the list below problems.
1. Contours, slim roadways, railway crossings;.
2. Areas with a longitudinal slope higher than 5%.
3. When there is an obstacle on one side of the road, the contrary side of the area with the same length as the barrier must be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844